Product Description

Overview

WDet-5000 is a self-developed ammonia-nitrogen online monitoring instrument, based on the global initiative magnetic conductivity measurement platform, combining with constant optical fiber and digestion colorimetric integration technology. The ammonia-nitrogen automatic online monitoring system has the features, including high precision, low detection limit, high stability and low maintenance frequency.

 

This product works in accordance with the technical requirements of HJ/T 536-2009 Water Quality Ammonia-Nitrogen Measurement-Salicylic Acid Method, fully meets the pollution sources, municipal wastewater, industrial processes in the application areas, and has passed the certification of CMC and CCEP.

Features Technical Specification

Features Of WDet-5000 Ammonia-Nitrogen Online Automatic Analyzer

 

High accuracy and reliability, strong capability of anti-interference

● Magnetic conductivity measurement technology will be not affected by chromaticity, suspended solids, and bubbles, especially suitable for the monitoring of inlet water

● A special design of flow and reagent ratio, high precision, low detection limit(0.01mg/L)

● Adopt constant optical fiber and light intensity compensation algorithm, small drift for long-term operation

 

Low maintenance and cost

● Has a key self-check function, easy to debug, maintain, comparison test

● Self-diagnosis function, assisting maintainer to analyze the failure

● Imported single-channel high integration valve island which is simple and easy to maintain, dismantle and clean

● All-day networking for real-time inspection of instrument running state

 

High intelligent level

● Scan code function: rapidly obtain running/maintenance information of the instrument

● Alarm function: provide intuitive and accurate information for grounding self-check, reagent insufficiency and etc

● Quality control: equipped with a parallel sample test, standard sample verification, and standard recovery rate detection

● Reverse control function: start automatically by flow and PH

 

Technical Specification Of Ammoniacal Nitrogen Water Quality Online Automatic Analyzer

Method	Water Quality Ammonia-Nitrogen Measurement-Salicylic Acid Method
Range	0.01～2～10～100mg/L
Zero Drift	＜0.02mg/L
Span Drift	＜1%
Indication Error	±10%
Repeatability	≤3%
Memory Effect	20%F.S. ±0.3mg/L
	80% F.S. ±0.2mg/L
Interval	Hourly and interval measurement, and the instrument can also be started by serial port
Maintenance	＜2 hour/month
Quantitative Lower Limit	0.01mg/L
Quality Control Sample Comparison	±10%
Water Sample Comparison	＞2mg/L±10% ≤2mg/L±0.2mg/L
Reagent	1 set reagents is able for about 250 times of measurement (can be customized according to field needs)
External Interface	1×4-20mA input/output (expandable to 2 ) RS485/RS232/USB interface/WIFI/ Bluetooth (optional)
Working Temp	5℃～40℃
Power	200W (220VAC 50Hz), regardless of the pump

Payment Terms︰ T/T, L/C